Trillium 120 Horizon
The second generation Horizon maintains all of the performance and capabilities of the first generation while reducing power consumption by over 50%
Trillium 120 Horizon
Trilium 120 HorizonCategories: Seismometer
The second generation Horizon maintains all of the performance and capabilities of the first generation while reducing power consumption by over 50%. In addition to the new lower power consumption, the Trillium Horizon’s design is exceptionally versatile, ideal for both direct bury and vault use cases. This lightweight, easy-to-deploy sensor can be direct buried at shallow depth or set on a pier.
Nanometrics’ commitment to the ongoing improvement of our instrumentation has led to the latest version of the Trillium Horizon. This second generation Horizon maintains all of the performance and capabilities of the first generation while reducing power consumption by over 50%.
In addition to the new lower power consumption, the Trillium Horizon’s design is exceptionally versatile, ideal for both direct bury and vault use cases. This lightweight, easy-to-deploy sensor can be direct buried at shallow depth or set on a pier.
Product Detail Description
Ultra-low power consumption: 230 mW
Designed for:
- Both shallow bury and vault installs
- Ideal for regional and teleseismic studies
Highly portable and easy to deploy
Features:
- A digital bubble level for easy downhole leveling
- Stainless steel and resistant to the elements
- Immersible to 10 m (able to survive indefinitely in a flooded vault)
- Top-mounted connector to facilitate direct bury
- Automatic mass centering
Self-noise: See self-noise graph
Nominal Sensitivity:
- 1200 V-s/m (Standard, Polar Certified & Magnetic Shield Models)
- 2000 V-s/m (2000 V/s/m Model) (reference User Guide for precise value)
Precision: ±0.5% relative to User Guide specification
Bandwidth: -3 dB points at 120 s and 150 Hz
Clip level:
- 16.6 mm/s up to 10 Hz and 0.12 g above 10 Hz (Standard, Polar Certified & Magnetic Shield Models)
- 10.0 mm/s up to 20 Hz and 0.12 g above 10 Hz (2000 V/s/m Model)
Dynamic Range:
- 168 dB @ 1 Hz (Standard, Polar Certified & Magnetic Shield Models)
- 164 dB @ 1 Hz (2000 V/s/m Model)
Operating Tilt Range: ±1.5º
Temperature: ±45°C without recentering
Magnetic Sensitivity: <0.03 (m/s²)/T (Polar Certified & Magnetic Shield Models)
Connector: 19-pin UTS7-14D19P32
Velocity Output: 40 V peak-to-peak differential
- Selectable XYZ or UVW mode
Mass Position Output: Three independent ±4 V outputs
Calibration Input: Single voltage input with one active-high control signal for all channels; calibration with XYZ or UVW
Control Lines: Mass Center, Calibration Enable, XYZ/UVW mode
Serial Port:
- RS-232 compatible serial IP (SLIP) with onboard HTTP web server to select sensor operating modes, to mass center, and to access state-of-health, virtual level bubble, firmware updates and metadata
- Plug-and-Play automated workflow interface to select sensor operating modes, and to access state-of-health, virtual level bubble and metadata
Supply Voltage: 9 to 36 V DC isolated input
Power Consumption: 230 mW typical quiescent
Protection:
- Reverse-voltage and over-voltage protected
- Self-resetting over-current protection
Operating Temperature:
- –20°C to 60°C (Standard & Magnetic Shield Models)
- –50°C to 60°C (Polar Certified Model)
Storage Temperature:
- –40°C to +70°C (Standard & Magnetic Shield Models)
- –60°C to +70°C (Polar Certified Model)
Optional: Insulating cover available for quick and convenient installation
Humidity: 0% to 100% (submersible)
Shock:
- 20 g half sine, 5 ms without damage, 6 axes
- No mass lock required for transport
Ingress Protection:
- (Standard Models) Rated to IP68 and NEMA 6P to 10m for prolonged immersion
- (Polar Certified Model) Rated to IP68 at 2 m for 72 hours when connector is mated
| trillium_horizon_120.pdf |
